AMON

1. Click on “AMON”

2. Click on “Setup”



1. Click on the “Options” tab.

2. Place a tick in “Potentially unsafe applications”.



1. Click on “Actions” tab

2. Choose a Radio Button that suits your needs.

3. Click on “OK”.



1. Click on the “Exclusions” tab. If you are having issues with a file being continually scanned, you may be pointed to here in order to exclude such a file.

2. Click “OK”.



DMON


1. Click on “DMON”.

2. Click on “Setup”.



1. Click on the “Setup” tab.

2. Place a tick in “Potentially unsafe applications”.



1. Click on the “Actions” tab

2. The actions you have chosen are for specific file types, in this instance “Files”. Clicking on the drop down arrow reveals the next step.



Follow the Red Arrows and choose Radio Buttons that suits your needs.

The same advice for each choice can be found in the post that covers DMON> Actions tab.

1. Clicking on the drop down arrow reveals the next step.



Follow the Red Arrows and choose Radio Buttons that suits your needs.

The same advice for each choice can be found in the post that covers DMON> Actions tab.

1. Clicking on the drop down arrow reveals the next step.



Follow the Red Arrows and choose Radio Buttons that suits your needs.

The same advice for each choice can be found in the post that covers DMON> Actions tab.

2. Click on “OK”.



EMON


Note: EMON is now installed by default for use with Microsoft OUTLOOK (not Outlook EXPRESS)


1. Click on “EMON”.

2. Click on “Setup”.



1. Click on “Scanner”.

2. Place a tick in “Scan plain text message bodies” and “Scan RTF message bodies”; I know, but they said the same thing about jpeg files.



1. Click on “Detection”.

2. Place a tick in “Potentially dangerous applications”.



1. Click on “Extensions”.

2. Place a tick in “Scan extensionless files”.



1. Click on “Actions”.

Follow the Red Arrows and choose Radio Buttons that suits your needs.

The same advice for each choice can be found in the post that covers DMON> Actions tab.

2. Clicking on the drop down arrow reveals the next step.



Follow the Red Arrows and choose Radio Buttons that suits your needs.

The same advice for each choice can be found in the post that covers DMON> Actions tab.

2. Clicking on the drop down arrow reveals the next step.



Follow the Red Arrows and choose Radio Buttons that suits your needs.

The same advice for each choice can be found in the post that covers DMON> Actions tab.

2. Clicking on the drop down arrow reveals the next step.



Follow the Red Arrows and choose Radio Buttons that suits your needs.

The same advice for each choice can be found in the post that covers DMON> Actions tab.



1.Click on “Environment”.

Follow the Red Arrow and choose a Radio Button that suits your need.



1. Click on “Logs”.

Place a tick in “Log all files”.

2. Click on “OK”.



IMON

1. Click on “IMON”.

2. Click on “Setup”.



1. Click on the “POP3” tab.

2. Click on “Compatibility Setup” > setup



This is where you will be instructed to go if you are having an issue with IMON...



1. You can adjust IMONs compatibility setup by sliding this along arrow along the bar.

2. Click on “OK”.



1. Click on the “HTTP” tab.

2. Click on the Radio Button that reads “Automatically deny download of file”.

3. Click on the “Client Compatibility” button.

This is where you will be instructed to go if you are having an issue with a particular program...



1. It is recommended to change the compatibility level to "Higher Efficiency" unless you experience problems with certain applications.

NOTE: With “Higher Compatibility” mode it is possible that Trojans may slip through IMON.


2. Click on “OK”.



1. Click on the “Miscellaneous” tab.

2. Place a tick in "Log intrusion attempts to the virus log".

3. do NOT click this unless you are advised to, or you are seeing a slow internet connection. This button repairs the LSP chain (Winsock).

Further instructions on repairing Winsock can be found in post number 124 here.

4. Click on “Scanner> Setup”.



1. Click on the “Setup” tab.

2. Place a tick in “Potentially unsafe applications”.



1. Click on the “Actions” tab

Follow the Red Arrows and choose Radio Buttons that suits your needs.

The same advice for each choice can be found in the post that covers DMON> Actions tab.

2. Clicking on the drop down arrow reveals the next step.



Follow the Red Arrows and choose Radio Buttons that suits your needs.

The same advice for each choice can be found in the post that covers DMON> Actions tab.

1. Clicking on the drop down arrow reveals the next step.



Follow the Red Arrows and choose Radio Buttons that suits your needs.

The same advice for each choice can be found in the post that covers DMON> Actions tab.

1. Clicking on the drop down arrow reveals the next step.



Follow the Red Arrows and choose Radio Buttons that suits your needs.

The same advice for each choice can be found in the post that covers DMON> Actions tab.

1. Clicking on the drop down arrow reveals the next step.



Follow the Red Arrows and choose Radio Buttons that suits your needs.

The same advice for each choice can be found in the post that covers DMON> Actions tab.

1. Click on “OK”.



1. Click on “OK”.



NOD32

1. Click on “NOD32”

2. Click on “Run NOD32”



1. Click on the “Scanning Targets” tab.

2. Make sure ONLY your Hard Drives have a RED tick.

In this screenshot I have 4 hard drives, hence you can see 4 red ticks. If you only have 1 hard drive then there should only be 1 red tick present.



PROFILES


1. Click on the “Profiles” tab.

2. Place a tick in “Run this profile in cleaning mode” and “Use this profile for scanning files/folders from within the context menu.

3. Make sure this Radio Button is checked.


Each profile can have different scanning settings if you so desire, or you can have NOD32 scan exactly the same way in all profiles. NOD32 is just giving you choices, and choices are good.

It’s like having many pizzas and with each you can choose a different topping, or you may have a favorite topping that you want on all pizzas.



1. Click on the “Setup” tab.

2. Place a tick in everything found within “Scan” box.

3. Place a tick in everything found within “ThreatSense scanning options” box.

4. A warning box will pop up regarding “Advanced Heuristics” and the use thereof. Further information can be found by click on the “more…” link.

5. Click on “Close”.



1. Click on the “Actions” tab

Follow the Red Arrows and choose Radio Buttons that suits your needs.

The same advice for each choice can be found in the post that covers DMON> Actions tab.

2. Clicking on the drop down arrow reveals the next step.



Follow the Red Arrows and choose Radio Buttons that suits your needs.

The same advice for each choice can be found in the post that covers DMON> Actions tab.

1. Clicking on the drop down arrow reveals the next step.



Follow the Red Arrows and choose Radio Buttons that suits your needs.

The same advice for each choice can be found in the post that covers DMON> Actions tab.

1. Clicking on the drop down arrow reveals the next step.



Follow the Red Arrows and choose Radio Buttons that suits your needs.

The same advice for each choice can be found in the post that covers DMON> Actions tab.

1. Clicking on the drop down arrow reveals the next step.



Follow the Red Arrows and choose Radio Buttons that suits your needs.

The same advice for each choice can be found in the post that covers DMON> Actions tab.

1. Clicking on the drop down arrow reveals the next step.



Follow the Red Arrows and choose Radio Buttons that suits your needs.

The same advice for each choice can be found in the post that covers DMON> Actions tab.

1. Clicking on the drop down arrow reveals the next step.



Follow the Red Arrows and choose Radio Buttons that suits your needs.

The same advice for each choice can be found in the post that covers DMON> Actions tab.

1. Clicking on the drop down arrow reveals the next step.



Follow the Red Arrow and choose a Radio Buttons that suits your needs.



1. Click on the “Scanning log” tab.

2. Place a tick in “Scrolling”.

3. Click on “Quit”.



(ถ้ามีเพิ่มเติมจะจำมาลงอีกส่วนเรื่องภาษาจะพยายามแปลให้แต่ดูจากรูปผมว่าเข้าใจได้ดีแล้วครับ

ดูรายละเอียดเพิ่มเติมได้ที่ http://www.wilderssecurity.com/forumdisplay.php?f=15

ที่มา  beartai.com